Select Page

Edge Paper Points

Easy Use

Our paper points are highly absorbent and come in sterlized packaging. They come in all the standard sizes, from 15 to 50 in .04 and .06 taper. Points are standard length 29mm +/-1 with marked lengths for accurate insertion. Each box comes with 60 points. 

Works with Your Current System

You can use Edge Paper Points to fill cases shaped by any popular file (including: WaveOne®, ProTaper®, GT® or GT Series X®, Vortex®, ProFile®, Sequence®, K3®, or TF File®) — to provide great, beautiful fills. It will fill all tip sizes and tapers.

Item Codes By File System

EdgeFile®

Our EdgeFile® points are compatible with X1, X3, X5, X7 and XR. They come in all the standard sizes, from 15 to 50 in .04 and .06 taper and are standard length 29mm +/-1. 

Click image to enlarge.

EdgeOne™ Fire

Our EdgeOne™ Fire points for EdgeOne Fire™ come in all the standard sizes, for Small – Large and are standard length 29mm +/-1.

Click image to enlarge.

EdgeTaper Encore™

EdgeTaper Encore™ points come in  sizes X1 – X5 and are standard length 29mm +/-1.

Click image to enlarge.

EdgeTaper™ and EdgeTaper Platinum™

EdgeTaper™ and EdgeTaper Platinum™ points compliment F1, F2, F3, F4 and F5 and are standard length 29mm +/-1.

Click image to enlarge.

EdgeSequel™ Sapphire

Our EdgeSequel™ points come in all the standard sizes, from 15 to 50 in .04 and .06 taper and are standard length 29mm +/-1.

Click image to enlarge.

Safety Data Sheet

TBD